| If you want to get the most out of your CO2 tank, | | | | gas form. Most paintball guns shoot horrible when liquid |
| there are three ways that you can get the most out | | | | CO2 enters the gun. This will often cause the gun to |
| of it in terms of operation, performance and life. | | | | "freeze up" and have a drop in performance. An anti |
| | | | siphon kit will help make sure that just the gas is |
| 1. Install an On/Off valve. If your paintball tank has a | | | | getting into the gun. This will improve your gun's |
| normal pin valve, you are missing out on the | | | | performance in terms of consistency from shot to |
| convenience of having an on/off valve. With an on/off | | | | shot. |
| valve on your paintball tank you can screw in your | | | | 3. To keep your CO2 tank scratch free and in pristine |
| tank, turn on the valve to gas your gun up, and then | | | | condition, you can buy a neoprene CO2 tank cover to |
| when you're done, simply turn it off. When you turn of | | | | cover your tank. It will protect it from dings and from |
| your CO2 tank, you can shoot the remaining CO2 left | | | | normal wear and tear, and can even help your tank |
| in the gun out. Shooting out the CO2 of your paintball | | | | grip your shoulder a little better. |
| gun will make it tons easier to unscrew the tank. One | | | | To get the most out of your CO2 tank an on/of valve |
| thing that is annoying about pin valve CO2 tanks is that | | | | will add convenience. You'll be able to easily turn on |
| when you unscrew them it will hiss CO2 out and may | | | | and off the air to your gun, and you'll also increase the |
| even ruin your o-ring on the tank in the process. | | | | life of your tank o-rings. An anti-siphon kit will help fuel |
| Installing an on/off valve will help your o-rings last | | | | your gun with CO2 gas, and not CO2 liquid. This will |
| longer. | | | | help your gun perform with better consistency. To |
| 2. Install an anti-siphon kit to your CO2 tank. Installing an | | | | protect your paintball tank and kept it looking brand |
| anti-siphon to your paintball CO2 tank will help you get | | | | new, a neoprene cover will keep your tank from |
| the most out of CO2. The main problem with CO2 is | | | | getting scratches and dings from normal use. |
| that when it is inside your tank, it is often in liquid and | | | | |